Product Overview
TSURUMI LSC14S Electric 110V 1" Residue Puddle Water Pump - CEOBLSC14S
The TSURUMI LSC1.4S Submersible Pump is also known as a Residue/Puddle Pump because it is able to pump water down to 1 mm. This makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port to enable the user to position the outlet hose horizontally or vertically and avoid it kinking.
For durability during robust handling, the LSC1.4S submersible pump has a pressed steel outer casing and a cast aluminium pump stand which offers increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.
An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose. Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hard - wearing double silicon carbide mechanical seal, which runs in an oil chamber that has an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water.
This pump is used widely by Hire outlets, utilities and flood control companies where the need to pump to a lower level is there.
Features :
- 10 Metres of Heavy Duty Rubber Power Cable.
- 110 V Single-phase
- Flow Rate of 170 Litres Per Minute
- Head of 11 Metres
- Weight of 12 kg
Please Note : This Water Pump Doesn't Include Hose.
Model - LSC14S
Voltage (V) - 110V
Outlet (mm) - 25
KW - 0.48
Flow (l/min) - 170
Head (metres) - 11
Free Passage (mm) - 6
Diameter x Height (mm) 196 x 316
Dry Weight (kg) - 12
